| back to choices | show all versions | |||
| Request to BLOCK | Request to BLOCK | Request to BLOCK | ||
| PDF Data sheet | PDF Data sheet | PDF Data sheet | ||
PM-0124-010-0 |
PM-0124-020-0 |
PM-0124-040-0 |
||
| Advantages | ||||
|---|---|---|---|---|
Benefits 1 |
Stabilised and adjustable output voltage
|
Stabilised and adjustable output voltage
|
Stabilised and adjustable output voltage
|
|
Benefits 2 |
Low stand-by consumption <1 W
|
Low stand-by consumption <1 W
|
Low stand-by consumption <1 W
|
|
Benefits 3 |
Constant current characteristic
|
Constant current characteristic
|
Constant current characteristic
|
|
Benefits 4 |
DC OK signalling
|
DC OK signalling
|
DC OK signalling
|
|
Benefits 5 |
Parallel operation optien
|
Parallel operation optien
|
Parallel operation optien
|
|
Benefits 6 |
Push-In terminals
|
Push-In terminals
|
Push-In terminals
|
|
Benefits 7 |
Panel installation on mounting rails
|
Panel installation on mounting rails
|
Panel installation on mounting rails
|
|
| Applications | ||||
Applications 1 |
Efficient primary switched mode power supplies in a rugged plastic housing. The power supplies cover the lower power requirements in the range from 25W to 100W.
|
Efficient primary switched mode power supplies in a rugged plastic housing. The power supplies cover the lower power requirements in the range from 25W to 100W.
|
Efficient primary switched mode power supplies in a rugged plastic housing. The power supplies cover the lower power requirements in the range from 25W to 100W.
|
|
| Input | ||||
Input rated voltage |
100 - 240 Vac
|
100 - 240 Vac
|
100 - 240 Vac
|
|
Input Voltage range |
85 - 264 Vac (120 - 373 Vdc)
|
85 - 264 Vac (120 - 373 Vdc)
|
85 - 264 Vac (120 - 373 Vdc)
|
|
Input voltage derating |
-2,5 %/Vac < 95 Vac
|
-2,5 %/Vac < 95 Vac
|
-2,5 %/Vac < 95 Vac
|
|
Rated frequency range |
44 Hz - 66 Hz / 0 Hz
|
44 Hz - 66 Hz / 0 Hz
|
44 Hz - 66 Hz / 0 Hz
|
|
Input rated current (rated load) |
0.43 A (100 Vac) / 0.2 A (240 Vac)
|
0.73 A (100 Vac) / 0.37 A (240 Vac)
|
1.52 A (100 Vac) / 0.66 A (240 Vac)
|
|
Starting current limiter |
< 30 A, NTC
|
< 30 A, NTC
|
< 30 A, NTC
|
|
Switch‑on time |
2.3 s (100 Vac) / 0.74 s (230 Vac)
|
0.5 s (100 Vac) / 0.27 s (230 Vac)
|
0.24 s (100 Vac) / 0.14 s (230 Vac)
|
|
Power factor |
0.48
|
0,47
|
0.5
|
|
Input fuse internal |
2 A
|
4 A
|
4 A
|
|
Recommended back‑up fuse (circuit breaker) |
6 A, 10 A, 16 A,
characteristic B, C |
6 A, 10 A, 16 A,
characteristic B, C |
6 A, 10 A, 16 A,
characteristic B, C |
|
Mains buffering |
20 ms (100 Vac) / 120 ms (230 Vac)
|
20 ms (100 Vac) / 120 ms (230 Vac)
|
15 ms (100 Vac) / 80 ms (230 Vac)
|
|
Transient surge voltage protection |
varistor
|
varistor
|
varistor
|
|
Terminals Input |
Push-In Terminals,
max 2.5 mm² |
Push-In Terminals,
max 2.5 mm² |
Push-In Terminals,
max 2.5 mm² |
|
| Output | ||||
Output rated voltage |
24 Vdc
|
24 Vdc
|
24 Vdc
|
|
Output Voltage range |
23 – 28,5 Vdc
|
23 – 28,5 Vdc
|
23 – 28,5 Vdc
|
|
Output rated current |
1.00 A
|
2.00 A
|
4.00 A
|
|
Output limited current |
typ. 1.1 A (contant current)
|
typ. 2.2 A (contant current)
|
typ. 4.4 A (contant current)
|
|
Parallel connection |
Yes
|
Yes
|
Yes
|
|
Serial operation |
Yes
|
Yes
|
Yes
|
|
Power dissipation, no load/rated load |
< 1 W / 4 W (230 Vac)
|
< 1 W / 4 W (230 Vac)
|
< 1 W / 12 W (230 Vac)
|
|
Max. power losses |
5 W (100 Vac / 24 V / 1 A)
|
7 W (100 Vac / 24 V / 2 A)
|
15 W (100 Vac / 24 V / 4 A)
|
|
Efficiency |
86 %
|
89 %
|
89 %
|
|
Ripple factor |
typ. 20 mVss
|
typ. 20 mVss
|
typ. 20 mVss
|
|
Resistance to reverse feed max. |
35 Vdc
|
35 Vdc
|
35 Vdc
|
|
Over‑voltage‑protection |
max. 39 Vdc
|
max. 37 Vdc
|
max. 40 Vdc
|
|
Terminals Output |
Push-In Terminals,
max 2.5 mm² |
Push-In Terminals,
max 2.5 mm² |
Push-In Terminals,
max 2.5 mm² |
|
| Signaling | ||||
Status display |
LED green
Uout > typ. 21.5 Vdc LED lit permanently |
LED green
Uout > typ. 21.5 Vdc LED lit permanently |
LED green
Uout > typ. 21.5 Vdc LED lit permanently |
|
Signal output |
Active high signal
Uout > typ. 21.5 Vdc max. 20 mA@24 Vdc short circuit proof |
Active high signal
Uout > typ. 21.5 Vdc max. 20 mA@24 Vdc short circuit proof |
Active high signal
Uout > typ. 21.5 Vdc max. 20 mA@24 Vdc short circuit proof |
|
Terminals signaling |
Push-In terminals,
max 2.5 mm² |
Push-In terminals,
max 2.5 mm² |
Push-In terminals,
max 2.5 mm² |
|
| Environment | ||||
Storage temperature |
-25° C ... +85° C
|
-25° C ... +85° C
|
-25° C ... +85° C
|
|
Ambient temperature |
-25° C ... +70° C
|
-25° C ... +70° C
|
-25° C ... +70° C
|
|
Derating |
-3 %/K > +50° C
|
-3 %/K > +50° C
|
-3 %/K > +50° C
|
|
Mounting position |
horizontal for standard rail DIN TH 35
|
horizontal for standard rail DIN TH 35
|
horizontal for standard rail DIN TH 35
|
|
Cooling method |
Natural convection
|
Natural convection
|
Natural convection
|
|
Required minimum spacing (left/right) |
‑
|
‑
|
‑
|
|
Required minimum spacing (over/under) |
50 mm
|
50 mm
|
50 mm
|
|
| Safety and protection | ||||
|
IP 20
|
IP 20
|
IP 20
|
|
|
Safety class |
II, without PE connection
|
II, without PE connection
|
II, without PE connection
|
|
MTBF in acc. IEC 61709 (SN 29500) |
> 500 000 h
|
> 500 000 h
|
> 500 000 h
|
|
| Measures and weights | ||||
Weight |
0.13 kg
|
0.21 kg
|
0.39 kg
|
|
Dimension (W x H x D) |
22.5 x 90 x 97.5 mm
|
45 x 90 x 97.5 mm
|
72 x 90 x 109.5 mm
|
|
Dimension picture on request |
Dimension picture on request |
Dimension picture on request |
||
| Order numbers | ||||
Order Number |
PM‑0124‑010‑0
|
PM‑0124‑020‑0
|
PM‑0124‑040‑0
|
|