Primary switched mode power supply, with Line monitor PVSL 400

Primary switched mode power supply, with Line monitor PVSL 400, PVSL 400
Data Standards/Certifications Applications Downloads
General Data
  • Input rated voltage 3 x 400 ‑ 500 Vac
  • Output rated voltage 24 Vdc
  • Output rated current 10 ‑ 40 A
  • Ambient temperature ‑25° C to +70° C
  • Efficiency up to 92 %
  • Protection index IP 20
Advantages
  • Power input monitoring
  • LCD
  • Current and voltage output monitoring
  • RS‑232 interface
  • Stabilised and adjustable output voltage
  • Up to 200 % real power boost for 4 seconds
  • Top boost to trip miniature circuit breakers
  • 3 LEDs and active signal outputs to indicate operating status
  • Parallel connection option
  • Service‑friendly spring‑loaded connector system
  • Can be supplied with active inrush current limiting
  • Panel installation on mounting rails
W o

  back to choices show all versions
  Buy at distributor   Buy at distributor   Buy at distributor  
  Request to BLOCK Request to BLOCK Request to BLOCK Request to BLOCK Request to BLOCK Request to BLOCK
  PDF Data sheet PDF Data sheet PDF Data sheet PDF Data sheet PDF Data sheet PDF Data sheet
 
PVSL 400/24-10
PVSL 400/24-10B
PVSL 400/24-20
PVSL 400/24-20B
PVSL 400/24-40
PVSL 400/24-40B
Input
Input rated voltage
3 x 400 - 500 Vac
3 x 400 - 500 Vac
3 x 400 - 500 Vac
3 x 400 - 500 Vac
3 x 400 - 500 Vac
3 x 400 - 500 Vac
340 - 550 Vac (480 - 780 Vdc)
340 - 550 Vac (480 - 780 Vdc)
340 - 550 Vac (480 - 780 Vdc)
340 - 550 Vac (480 - 780 Vdc)
340 - 550 Vac (480 - 780 Vdc)
340 - 550 Vac (480 - 780 Vdc)
Input rated current (rated load)
0.6 A (3 x 340 Vac)
0.6 A (3 x 340 Vac)
1.1 A (3 x 340 Vac)
1.1 A (3 x 340 Vac)
2 A (3 x 340 Vac)
2 A (3 x 340 Vac)
44 Hz - 66 Hz / 0 Hz
44 Hz - 66 Hz / 0 Hz
44 Hz - 66 Hz / 0 Hz
44 Hz - 66 Hz / 0 Hz
44 Hz - 66 Hz / 0 Hz
44 Hz - 66 Hz / 0 Hz
Starting current limiter
<30 A, NTC
<2 x rated current, active
<30 A, NTC
<2 x rated current, active
<30 A, NTC
<2 x rated current, active
Input fuse internal
3 x 1.6 A (slow‑blow)
3 x 1.6 A (slow‑blow)
3 x 2.5 A (slow‑blow)
3 x 2.5 A (slow‑blow)
3 x 6.3 A (slow‑blow)
3 x 6.3 A (slow‑blow)
Recommended back‑up fuse (circuit breaker)
6 A, 10 A, 16 A, characteristics B, C
6 A, 10 A, 16 A, characteristics B, C
6 A, 10 A, 16 A, characteristics B, C
6 A, 10 A, 16 A, characteristics B, C
10 A, 16 A, characteristics B, C
10 A, 16 A, characteristics B, C
Harmonic correction
passive
passive
passive
passive
passive
passive
Mains buffering
22.6 / 51.5 ms (400 / 500 Vac)
22.6 / 51.5 ms (400 / 500 Vac)
13.2 / 36.8 ms (400 / 500 Vac)
13.2 / 36.8 ms (400 / 500 Vac)
15.6 / 42.9 ms (400 / 500 Vac)
15.6 / 42.9 ms (400 / 500 Vac)
Transient surge voltage protection
Varistor
Varistor
Varistor
Varistor
Varistor
Varistor
Output
Output rated voltage
24 Vdc ±1 %
24 Vdc ±1 %
24 Vdc ±1 %
24 Vdc ±1 %
24 Vdc ±1 %
24 Vdc ±1 %
22.8 - 28.8 Vdc
22.8 - 28.8 Vdc
22.8 - 28.8 Vdc
22.8 - 28.8 Vdc
22.8 - 28.8 Vdc
22.8 - 28.8 Vdc
Resistance to reverse feed max.
35 Vdc
35 Vdc
35 Vdc
35 Vdc
35 Vdc
35 Vdc
Output rated current
10.00 A
10.00 A
20.00 A
20.00 A
40.00 A
40.00 A
Parallel connection
Yes
Yes
Yes
Yes
Yes
Yes
Power boost
20 A / 4 s (15 A / 8 s)
20 A / 4 s (15 A / 8 s)
40 A / 4 s (30 A / 8 s)
40 A / 4 s (30 A / 8 s)
60 A / 4 s (50 A / 8 s)
60 A / 4 s (50 A / 8 s)
Overload behaviour
Constant current or fuse
Constant current or fuse
Constant current or fuse
Constant current or fuse
Constant current or fuse
Constant current or fuse
Efficiency
typ. 91.7 %
typ. 91.7 %
typ. 92.9%
typ. 92.9 %
typ. 93.1 %
typ. 93.1%
Ripple factor
typ. 70 mVss
typ. 70 mVss
typ. 70 mVss
typ. 70 mVss
typ. 70 mVss
typ. 70 mVss
70 A / 50 ms
70 A / 50 ms
80 A / 50 ms
80 A / 50 ms
100 A / 50 ms
100 A / 50 ms
Signaling
Power Good (DC OK)
LED green, LED red, LED yellow
LED green, LED red, LED yellow
LED green, LED red, LED yellow
LED green, LED red, LED yellow
LED green, LED red, LED yellow
LED green, LED red, LED yellow
Active signal outputs
4 x 24 Vdc, 2 configurable
4 x 24 Vdc, 2 configurable
4 x 24 Vdc, 2 configurable
4 x 24 Vdc, 2 configurable
4 x 24 Vdc, 2 configurable
4 x 24 Vdc, 2 configurable
Stand‑by‑input
No
No
No
No
No
No
Display, interface
Yes, RS 232
Yes, RS 232
Yes, RS 232
Yes, RS 232
Yes, RS 232
Yes, RS 232
Standards
Classification
Primary switched mode power supply
Primary switched mode power supply
Primary switched mode power supply
Primary switched mode power supply
Primary switched mode power supply
Primary switched mode power supply
Approvals
Approvals
cURus, cULus
cURus, cULus
cURus, cULus
cURus, cULus
cURus, cULus
cURus, cULus
Environment
Ambient temperature
‑25° C to +70° C
‑25° C to +70° C
‑25° C to +70° C
‑25° C to +70° C
‑25° C to +55° C
‑25° C to +55° C
Storage temperature
-25° C to +85° C
-25° C to +85° C
-25° C to +85° C
-25° C to +85° C
-25° C to +85° C
-25° C to +85° C
Derating
‑3 %/K > +50° C
‑3%/K> +50°C
‑3%/K > +50°C
‑3 %/K > +50° C
‑5 %/K > +50° C
‑5 %/K > +45° C
Safety and protection
IP 20
IP 20
IP 20
IP 20
IP 20
IP 20
Safety class
I, with PE connection
I, with PE connection
I, with PE connection
I, with PE connection
I, with PE connection
I, with PE connection
Terminal and mounting
Connections input, (spring clamp terminal, pluggable)
max. 2.5 mm²
max. 2.5 mm²
max. 2.5 mm²
max. 2.5 mm²
max. 2.5 mm²
max. 2.5 mm²
Connections output, (spring clamp terminal, pluggable)
max. 2.5 mm²
max. 2.5 mm²
max. 10 mm²
max. 10 mm²
max. 10 mm²
max. 10 mm²
Connections signalling, (spring clamp terminal, pluggable)
max. 0.5 mm²
max. 0.5 mm²
max. 0.5 mm²
max. 0.5 mm²
max. 0.5 mm²
max. 0.5 mm²
Mounting position
vertical
vertical
vertical
vertical
vertical
vertical
Fixing method
DIN Rail system TH 35
DIN Rail system TH 35
DIN Rail system TH 35
DIN Rail system TH 35
DIN Rail system TH 35
DIN Rail system TH 35
Measures and weights
Weight
1.00 kg
1.00 kg
1.30 kg
1.30 kg
2.50 kg
2.50 kg
  Dimension Picture Dimension Picture Dimension Picture Dimension Picture Dimension Picture Dimension Picture
Accessory
Connector for signalling
PV-CON (optional)
PV-CON (optional)
PV-CON (optional)
PV-CON (optional)
PV-CON (optional)
PV-CON (optional)
Adapter cable for interface
PV-KOK2 (optional)
PV-KOK2 (optional)
PV-KOK2 (optional)
PV-KOK2 (optional)
PV-KOK2 (optional)
PV-KOK2 (optional)
Side DIN Rail mounting
PV-TS35M (optional)
PV-TS35M (optional)
PV-TS35M (optional)
PV-TS35M (optional)
PV-TS35M (optional)
PV-TS35M (optional)
Direct screw fastening plate for lateral mounting    
PV-WB2 (optional)
PV-WB2 (optional)
PV-WB2 (optional)
PV-WB2 (optional)
PV-WB2 (optional)
PV-WB2 (optional)
Order numbers
Order Number
PVSL 400/24‑10
PVSL 400/24‑10B
PVSL 400/24‑20
PVSL 400/24‑20B
PVSL 400/24‑40
PVSL 400/24‑40B

System components, accessory, housing